A very compact bed accessorized with two lateral drawers that slide out on turning castors. There is also a bookcase module at the foot of the bed but it can be excluded on request. All drawers are under the bed and don't take up any extra room. Slats are included in the price. Size starts from 120x200 with a minimum height of 35cm.
This version of the Zen Plus bed is accessorized with lateral drawers and a bookcase module and the foot of the bed which can be removed on request. While the bookcase is fixed, the drawers can be pulled out on turning castors that rest directly on the floor.
It's possible to request the french bed with only one bookcase module at the foot of the bed and a lateral drawer on one side if you wish to place the bed against a wall. The single bed is not contemplated in the variants here but it is possible to make it on request. In that case the bed will have only one lateral drawer and, on request, a small bookcase module at the foot of the bed. The Zen Plus bed with lateral drawers and a bookcase module belongs to the category of Arpel storage beds.
Internal measures: variable. The bed with all 3 modules is available as a french, double or king size bed.
Single bed: ask for a price quote. It will have one lateral drawer and eventually a small bookcase module at the foot of the bed
External measures: 7 cm more than the selected internal measures. For example: the external measures of a bed with internal measures for a 160x200 cm mattress will be 167x207
Bed height: variable, we reccommend not to go under 35 cm
Drawer height: The frontal height of the drawers is about 11 cm less than the bed frame height and the internal height available for storage is about 16 cm less than the bed frame height. For example, in a bed that is 35 cm high, you can fill the drawers up to a height of 19 cm. If the bed is 40 or 45 cm high the available height of the drawer will respectively be 24 or 29 cm
Bookshelf height: A standard 35 cm high bed can contain books with a maximum height of 23 cm. The height can be enlarged by 5 cm at a time, this means it can progressively reach 40, 45 cm to contain books with a maximum height of 28, 33 cm
Bookcase depth: 20 cm
Length of the lateral drawers: if the bed is without a Zen headboard and for a 200 cm long mattress, the length of the drawers will be 155 cm and the available space inside the drawer is 147 cm. If the bed is with a Zen headboard and for a 200 cm long mattress then the drawers will be 5 cm longer. (read below)
Depth of the lateral drawers: Variable. It depends on the width of the bed. If the bed is 120 cm wide the drawer depth will be 50 cm. For beds with widths of 140, 160, 180 and 200 cm, the drawer depth is usually 60 cm. When ordering, if you believe to have enough space, it's possible to make the drawers 70 cm deep. Please specify when ordering.
Opening of the drawers/bedside tables: there is no problem with the opening of the drawers if you choose Arpel bedside tables with a depth up to 30 cm. If you already have bigger bedside tables we can modify the drawers making them shorter and making the feet of the bed larger at the head so that they can be opened without problems.
Length of the frontal bookcase module: Variable. If the bed is for a 160 cm wide mattress then the bookcase will be 117 cm long and the available space for books will be 113 cm. For a double bed for a 180 cm wide mattress the available space for books will be 133 cm.
Custom: The mattress size, bed height bookcase depth are customizable. Ask for a price quote
Wooden headboard: This bed can be accessorized with a Zen model tilted headboard. The space taken up by the headboard in the bed is 5 cm. To mantain the selected internal measures we will therefore make the bed 5 cm longer at no extra cost. This means that a bed with a headboard selected for a mattress of 205 cm will have and internal length of 205 cm and an external length of 212 cm. As the headboard is slanted a bit outwards, it recommended to consider a total length of 218 cm.
External wooden headboard: it's possible to accessorize the bed with a tilted headboard that is attached to the head panel with Allen screws. The price is the same, just ask for this type of headboard when ordering. This headboard protrudes about 11 cm from the bedframe. Therefore, a bed with an internal length of 200 cm with this type of headboard will be 218 cm long.
Ask for a price quote if you wish to add top covers to the drawers to protect the contents from dust.
If you also want a dustproof frontal closure, the front parts can be requested with leather straps instead of the opening notches .
This bed can be customised in the single-coloured or two-coloured version. See wood colours
Bed frame, feet, modules and headboard: in solid laminated beechwood
Standard slats: straight 1.8 cm thick firwood slats are included in the price
Other slats: it is possible to select straight solid beechwood slats or curved ergonomic multilayer slats with lumbar stiffness regulators from the accessories
This bed can contain japanese tatami. For a Zen Plus storage bed with tatami ask for a price quote
This bed belongs to the category of beds which do not use metal parts in the assembly. The modules instead require the use of metal parts and they are attached to the bedframe before adding the slats. The headboard must be inserted through specific grooves that run down the side panels or it must be screwed externally on the head panel, depending on the selected model.
If treated, the wood may be cleaned using only a damp sponge without solvents or detergents. If natural, it may only be dusted or vacuum cleaned.
To complete the bed, select a headrest or futon from the accessories. If you wish to sleep on a japanese mattress, find out more about our Futons, if you want a modern, ecological mattress, check out our Bio Memory mattresses.